食用蓝藻螺旋藻和葛仙米中金属元素的分析

采用硝酸和高氯酸(4∶1)混合酸消化2种可食用蓝藻螺旋藻和葛仙米,原子吸收光谱法检测螺旋藻和葛仙米中的K、Na、Mg、Ca、Zn、Fe、Cu、Mn、Cr、Pb和Cd共11种金属元素含量。结果表明,2种蓝藻中矿质元素含量均较高,特别是Ca含量高达61 905.132mg·kg~(-1);而有害重金属Cr,Po和Cd含量均远低于国家规定标准,表明这2种食用蓝藻均无重金属富集或污染。本结果显示,螺旋藻和葛仙米是极好的天然富钙营养食品,可作为人体矿质元素和微量元素缺乏症的补给品.     

Computational diffusion kinetics and its applications in study and design of rare metallic materials

Computational diffusion kinetics(CDK),with a spirit of and being coupled with the computational thermodynamics(CT,or called as the CALPHAD technique),plays increasingly important role in the alloy design/optimization and microstructure control during the processing of advanced metallic materials.This paper is to highlight recent progress of CDK in research with great focus on novel Ti and Zr alloys,which was largely performed in the authors’group.It ends with one representative example of the applications of CDK,coupled with CT,quantitative phase field,and three-dimensional(3D)statistical calculation,in designing the heattreatment schedule for the dual phase(αβ)Ti–6Al–4V alloys.     

Thermal stability and magnetic properties of Fe–Co–M–Zr–Nb–Ge–B(M=Mo,Cr) bulk metallic glasses

Fe62Co8 xMxZr6Nb4Ge1B19(M=Mo, Cr) bulk metallic glasses were synthesized in the diameter range up to 2 mm by copper mold casting,which exhibit high thermal stability and large glass-forming ability. The super-cooled liquid region diminishes by the dissolution of Mo. The addition of 2 at% Cr leads to the broading of the liquid region remarkably, resulting in the improvement of thermal stability. The crystallization takes place through a single exothermic reaction, accompanying the precipitation of more than three kinds of crystallized phases such as α-Fe,Fe2Zr and ZrB2. The Fe-based alloys show soft ferromagnetic properties. The saturation magnetization(ss) decreases with increasing Mo or Cr content while the saturated magnetostriction increases with raising Mo or Cr content. There is no evident change in the ssand coercive force(Hc)with annealing temperature below the crystallization temperature, which suggests a more relaxed atomic configuration the glasses have. The crystallization causes a substantial enhancement in both ssand Hc. Each soft magnetic property of the glasses containing Cr with higher thermal stability is superior to that of the alloys containing Mo.     

Zr基非晶合金准静态压缩下的多重剪切带行为

利用IUTM和SEM研究了Zr-Ti-Ni-Cu块状非晶合金的准静态单轴压缩变形和断裂行为. 研究表明:该合金的室温压缩变形过程主要表现为弹性和塑性变形,塑性变形阶段没有加工硬化现象. 在准静态压缩条件下Zr基非晶合金表现出多重剪切效应,提高了塑性. 微观研究证明,剪切带的滑移分枝与相互交叉是非晶合金塑性提高的主要机制. 沿着剪切带发现了微空洞和微裂纹,剪切带的形成与自由体积的合并有关. 塑性变形过程中形成脉纹状断口形貌,受力状态的不同脉状花纹表现为不同的形式.     

SnO2纳米线阵列的制备及纳米器件的制作

采用简单的溶胶-凝胶方法在多孔阳极氧化铝模板(AAM)的微孔中制备了高度有序的SnO2纳米线阵列。XRD,SEM和TEM对样品进行了结构和形貌的表征,结果表明,高度有序的SnO2纳米线具有四方相的多晶结构,纳米线连续均匀;并对SnO2纳米线阵列的生长机理进行了探讨;最后用聚焦离子束沉积设备制作了单根SnO2纳米线器件。     

基于3D Voronoi模型形状不规则度组合梯度泡沫金属的动态冲击力学性能研究

泡沫金属的力学性能与其细观结构参数密切相关。四个形状不规则度参数梯度组合的3D Voronoi结构模型被用于开展动态冲击数值仿真实验,探究不同冲击速度下形状不规则度梯度组合类型对泡沫金属的变形特性、荷载-位移和能量吸收特性的影响。结果表明,冲击速率仅在临界速度范围内时对形状不规则度梯度组合模型的力学性能有明显影响,沿着冲击方向形状不规则度从小到大梯度组合的模型具有最优的能量吸收能力。     

生物质棉纤维再生纤维素膜的制备与性能分析

以天然生物质棉纤维为原料,采用氯化锂/N,N-二甲基乙酰胺(Li Cl/DMAC)溶解体系对其进行活化处理,配置不同质量分数的纤维素有机溶液系列,在不同凝固浴条件下,采用KW-4A匀胶机高速旋涂成膜和AFA-Ⅱ自动涂膜器低速平推成膜2种工艺,制备再生纤维素薄膜系列。通过运用扫描电镜(SEM)、傅里叶变换红外光谱(FT-IR)、X射线衍射仪(XRD)和表面接触角测试仪等分析设备对再生纤维素膜的大分子结构、力学性能、结晶度、热稳定性和表面浸润性进行各项性能的系列化表征,研究纤维素质量分数、凝固浴种类、制膜工艺对膜性能的影响。实验结果表明:采用KW-4A匀胶机高速成膜工艺、凝固浴为水浴、纤维素质量分数为3.5%时,制备的再生纤维素膜的各项性能最佳;与天然生物质棉纤维相比,再生纤维素膜结晶度变化很大,热稳定性与棉纤维变化趋势一致但有一定程度下降,表面浸润性良好。     

烧结温度对高速压制制备弥散强化铜材料导电率的影响

弥散强化铜材料具有高强度和高导电性的特性,孔洞是影响导电率的重要因素.本文采用高速压制成形技术,对Al2 O3质量分数为0.9%的弥散强化铜粉压制成形,研究了压制速度对生坯的影响.当压制速度为9.4 m·s-1时得到密度为8.46 g·cm-3的生坯.研究了烧结温度对烧结所得Al2 O3弥散强化铜试样导电率的影响.当生坯密度相同时,烧结温度越高,所得试样的导电率也越高.断口与金相分析表明：烧结温度为950℃时,烧结不充分,颗粒边界以及孔洞多而明显,孔洞形状不规则;烧结温度为1080℃时,颗粒边界消失,孔洞圆化,韧窝出现,烧结坯的电导率为71.3%IACS.     

Formation and biocorrosion behavior of Zr-Al-Co-Nb bulk metallic glasses

Ni-and Cu-free Zr-Al-Co-Nb glassy alloys with different Nb and Co contents were synthesized by melt spinning and copper mold casting.The effects of Nb addition to partially replace Co in the Zr55Al20Co25 glassy alloy on the glass-forming ability,thermal properties,in-vitro biocorrosion behavior and surface wettability of the metallic glasses were investigated.Although addition of Nb up to 5 at.% slightly decreased the supercooled liquid region and the glass-forming ability(GFA),the alloys could be casted in a bulk glassy rod form with diameters up to 3mm.The Zr-Al-Co-Nb glassy alloys were spontaneously passivated with low passive current densities in phosphate buffered saline and Hanks’ solution.Substitution of "toxic" Co by Nb is effective in improved the corrosion resistance of the Zr-Al-Co glassy alloy.Water contact angle measurements showed that Nb addition increased the hydrophilicity of the glassy alloys,which may enhance cell adhesion of the alloys in biomedical applications.     

Atomic packing and short-to-medium range order evolution of Zr-Pd metallic glass

A larger-scale Zr₇₀Pd₃₀ alloy system has been simulated using molecular dynamics (MD) to investigate structure evolution in Zr₇₀Pd₃₀ metallic glass. The simulated pair distribution function of Zr₇₀Pd₃₀ metallic glass agrees well with the experimental results. Voronoi polyhedron analysis indicates that the icosahedra are not randomly distributed in space, but form characteristic intercrossed icosahedral clusters with medium-range order. Intercrossed icosahedral clusters are the dominant local configurations in Zr₇₀Pd₃₀ metallic glass and probably cause the quasicrystalline phase discovered in Zr₇₀Pd₃₀ metallic glass.